Helpdesk » Dial Up » Macosx 10.3
1)Click on the 'Apple' menu.
2)Select 'System Preferences...'.
3)Select the 'Network' icon.
Note: You may see a screen similar to above depending on which network devices are configured on your Mac. If you see these screen, choose 'Internal Modem' and 'Configure' to continue
4)Enter in the 'Service Provider' name as 'UQ' and the 'Account Name' and 'Password' of your account with UQconnect as well as the UQconnect National dial in number 0198307170.
5)Click [PPP Options...].
6)Above are the recommended 'Session Options' settings but these can be altered to suit personal preferences.
7)Ensure that only 'Send PPP echo packets' and 'Use TCP header compression' remains ticked.
8)Click [OK].
9)Select the 'TCP/IP' tab.
10)Enter in the 'DNS Server' numbers exactly as shown.
11)Click [Apply Now].
12)Select the 'Modem' tab.
13)Select the name of the modem which is setup on your Macintosh. This name will vary depending on the brand of modem you are using.
14)Ensure that 'Enable error correction and compression in modem' is ticked.
15)Ensure that the 'Country Setting' is set to 'Australia'.
16)Click [Apply Now].
17)Select the 'PPP' tab.
18)Click [Dial Now] to start the dial in after ensuring your modem is connected to the phone line.